Denon AVR-2808CI August 18th, 2008 | by Mike Kobrin
Full Review - Setup and Testing
Setup and Use Once everything's plugged in and connected, it's time to tune the amp to your room via the included Audyssey mic. It helps to have a tripod handy for mounting the mic, but you can get away with balancing it on the back of a chair or couch. (Don't hold it in your hand, as it will transmit sounds the system will pick up.) The 2808CI achieved a good home theater listening level at between -12dB to -28dB, with some variation for recordings with extreme dynamics. And surprisingly, the amp had no trouble driving our 4-ohm speakers, never going into thermal down even when we cranked the speakers at -6dB for a couple hours. (The closer to 0, the higher the volume.) Your neighbors will NOT love this aspect of the amp. Please listen responsibly. Music and Movies Music sounded phenomenal through the 2808CI our B&W speakers and Cambridge SoundWorks passive subwoofer. The Audyssey MultiEQ XT did most of the sound tweaking for us -- the before and after difference was dramatic. We set up the amp in a small (14 x 17) living room and then moved it to a large double-parlor living room, and although it needed a little bass boost in the larger room, it performed like a champ. Classic jazz and Western classical music had just a bit of warmth and excellent detail. Piano recordings like Jean-Philippe Collard's solo performances of Maurice Ravel's music and Bill Evans' classic Explorations positively glowed without smoothing anything over. Vocal music from Marvin Gaye, Tony Bennett, and REM had brilliance without being too harsh. The amp's low end has all the punch and definition you'll need for hard-hitting bass in hip-hop and reggae. We tried all the digital sound enhancers, and our favorite for music was Pure Direct, giving us a more natural balance than any of the Dolby, DTS, or Neural options. Dolby Pro Logic II Cinema worked best for movies, providing a slightly warmer sound with plenty of rumble for explosions. Blu-ray movies like X-Men 2 and I Am Legend played on our Sony PlayStation 3 looked absolutely fantastic on our Samsung 40-inch LCD TV. The audio in all the channels was crystal clear, thanks to the receiver's high-def audio format support, and the receiver's Faroudja FLi2310 video processor did a perfect job upscaling standard-def DVDs from our Onkyo DVD player to 1080p. Since the 2808CI has two independent zones for video, you can control AV in multiple rooms at once, but there's only a single HDMI output, so one will have to be analog. Apple iPod Dock A few different optional iPod docks are available, including a wired model, a networked model, and a wireless model. Our review unit came with the wired dock, which proved to be fairly well integrated with the system. You can use either of the remotes to browse your iPod and watch videos and slide shows on your TV screen, though the GUI could use a whole bucket of polish. We listened mostly to Apple Lossless files, but the Restorer feature comes in handy for MP3s and AACs, adding a little liveliness and partially mitigating the effects of audio compression. Conclusion If you want more digital features, like an Ethernet jack and USB port, you'll have to step up to the more expensive 3808CI ($1600 USD). But other than that, the Denon AVR-2808CI has more than enough power and features for most home theaters, and handles even power-hungry speakers with aplomb. The multiple zones are useful for hooking up music in an extra room or two, and the independent zone control gives you a lot of freedom.
The Audyssey setup detects what speakers are connected and measures the sound from up to seven different locations in your living room to figure out where certain frequencies get a natural boost. It then EQs the amp to compensate for sound quirks in those spots. The sound of the setup process may freak out your pet or spouse, but it's well worth it.
We used two different sets of speakers with the 2808CI: a pair of B&W 685s (8 ohms) and B&W 610i's, which are larger and have a lower impedance (4 ohms). Since one of the amp's zones is assignable, we bi-wired each set of speakers to the first and third zones' main speaker outputs. We also piggybacked a Cambridge SoundWorks passive subwoofer. For movies, we used the 610i as main speakers and the 685s as surrounds, with a Cambridge SoundWorks center channel.
There's plenty of opportunity for adjusting the sound to your personal tastes, but although you can adjust the treble and bass in via the menus, we'd have liked dedicated knobs. There's also a Night Mode, which it dampens the sound a bit and reduces the bass so your spouse and kids can sleep through your late-night listening sessions.
This isn't a good candidate for your first AV receiver, given its complexity, but if you're upgrading from a step-up model, this should be on your short list.
Pros:
• 3 independent zones
• Excellent sound and power
• Extremely versatile input/output
• Room calibration feature works wonders
• 1080p upscaling
Cons:
• Complex setup and interface

No User Reviews for this product. Be the first to voice your opinion!